Micro-Lock CE Urban Knuckle

SMART – SOFT – STABLE

NThe urban knuckle is 3D formed in a low profile design and made from Knox Micro-Lock material where the maximum thickness is just over 5mm (over the peaks of the knuckles). Shaped to perfectly to fit over the knuckles they come in 3 different sizes, Size 1 will fit XS & S gloves, Size 2 will fit M&L gloves and Size 3 will fit XL & XXL gloves. The knuckles are handed with Left & Right models and are sold in pairs.

While it is not possible to CE certify a single component that is an integral part of a finished glove, performance testing has shown the knuckles pass the impact performance requirements of EN 13594:2016 L1.

See fitting guide for sizes
Designed in Britain by Knox and Made In China
Colour – Yellow

Micro-Lock Range Sizing

Description	Part No	Length	Width	STANDARD	Level	Size  A or B	Weight per piece in grams	Thickness mm
Back	114	45cm	27cm	EN 1621-2 -2012	2	N/A	500g	19
Back	115	54cm	31cm	EN 1621-2 -2012	2	N/A	800g	22
Back	385	35cm	21cm	EN 1621-1 -2012	1	N/A	390g	17
Back	396	38cm	27cm	EN 1621-1 -2012	1	N/A	500g	17
Back	397	41cm	29cm	EN 1621-1 -2012	1	N/A	375g	17
Back	397	44cm	32cm	EN 1621-1 -2012	1	N/A	650g	17
Shoulder - S/L    Elbow/Knee - S	362	23.5cm	18.5cm	EN 1621-1 -2012	2	Type A - S, Type B - E/K	115g	20
Elbow/Knee	363	27cm	19cm	EN 1621-1 -2012	2	Type B - E/K	135g	20
Shoulder - S/L    Elbow/Knee - S	40	23cm	18cm	EN 1621-1 -2012	1	Type A  - E/K,    Type B - S	95g	15
Elbow/Knee	41	27.5cm	19cm	EN 1621-1 -2012	1	Type B  - E/K	114g	15
Elbow/Knee	42	27.5cm	21cm	EN 1621-1 -2012	1	Type B  - S/E/K	122g	15
Elbow/Knee	48	36cm	19cm	EN 1621-1 -2012	1	Type A - E/K,    Type B -  S	155g	15
Knee/shin	49	36cm	19cm	EN 1621-1 -2012	1	Type B  - K/L	155	15
Hip	215	12cm	21cm	EN 1621-1 -2012	1	Type A  - Hip	76g	15
Hip	216	16cm	26cm	EN 1621-1 -2012	1	Type B  - Hip	102g	15
Hip	219	11.5cm	18.5cm	EN 1621-1 -2012	1	Type B  - Hip	58g	15
Shoulder	52	23.5cm	19cm	EN 1621-1 -2012	1	Type B  - S	73g	13
Elbow/Knee	54	27.5cm	20cm	EN 1621-1 -2012	1	Type B  - E/K	93g	13
Shoulder	55	20cm	16cm	EN 1621-1 -2012	1	Type A -  S	65g	13
Elbow/Knee	56	23.5cm	15.5cm	EN 1621-1 -2012	1	Type A - E/K	75g	13
Boot Protector (In Dev)	393	7.5cm	7.5cm	n/a	n/a	n/a	36g	7
Knuckle Guard Size 1 - Small		8cm	4.5cm	n/a	n/a	n/a	10g	5
Knuckle Guard Size 2 - Medium		9cm	5cm	n/a	n/a	n/a	12g	5
Knuckle Guard Size 3 - Large		10cm	5.5cm	n/a	n/a	n/a	24g	5
Sheet Material - 3mm		40cm	30cm	n/a	n/a	n/a	N/A	3
Chest - Mens	390	24cm	34cm	n/a	1	n/a	400g	17
Chest - Ladies	391	24cm	33cm	n/a	1	n/a	340g	17
Chest	409	24cm	34cm	n/a	1	n/a	280g	17

The measurements above represent the actual size of the protector. The protector pockets should ideally be approx 1cm bigger all round. The protector opening should be at least 85% of the width of the protector. Care should be taken when inserting or removing protectors as excess force can cause damage. We cannot accept responsibility for damage caused by rough handling.